Habibur Rahman

• Rahman, Habibur; Recha, Adrian Miguel Llop; Wisland, Dag Trygve Eckhoff & Kjelgård, Kristian Gjertsen (2025). Dual-Mode Resonant Sensor for Depth Spectroscopy. In Manganaro, Gabriele (Eds.), 2025 IEEE International Symposium on Circuits and Systems (ISCAS). IEEE (Institute of Electrical and Electronics Engineers). ISSN 9798350356830. p. 1–5. doi: 10.1109/iscas56072.2025.11043763. Full text in Research Archive
• Rahman, Habibur; Recha, Adrian Miguel Llop; Wisland, Dag Trygve Eckhoff & Kjelgård, Kristian Gjertsen (2025). Conure: Expanded Surrogate-Based Artwork Generator for RFCMOS Transformers. In EuCAP (Eds.), 2025 19th European Conference on Antennas and Propagation (EuCAP). IEEE (Institute of Electrical and Electronics Engineers). ISSN 9788831299107. p. 1–5. doi: 10.23919/eucap63536.2025.10999249. Full text in Research Archive
• Rahman, Habibur; Recha, Adrian Miguel Llop; Fasciani, Stefano; Hogganvik, Pål Gunnar; Kjelgård, Kristian Gjertsen & Wisland, Dag Trygve Eckhoff (2024). Conure: Surrogate-based Artwork Generator for RFCMOS Integrated Inductors. IEEE International Symposium on Circuits and Systems proceedings. ISSN 0271-4302. doi: 10.1109/ISCAS58744.2024.10558598. Full text in Research Archive
• Sathyan, Alka; Muthukumaraswamy, Senthil Arumugam & Rahman, Habibur (2022). On the Study and Analysis of Automated Aquaponics System Using AVR Microcontroller, Intelligent Manufacturing and Energy Sustainability: Proceedings of ICIMES 2021. Springer. ISSN 9789811664816. p. 519–528. doi: 10.1007/978-981-16-6482-3_51. Full text in Research Archive
• Pabst, Oliver; Anwar, Abbas; Nieweglowski, Adam; Lindland, Christian Rolid; Rahman, Habibur & Siljedal, Håvard [Show all 18 contributors for this article] (2019). The non-linear electrical properties of silver/silver chloride electrodes in sodium chloride solution. Journal of Electrical Bioimpedance. 10(1), p. 113–123. doi: 10.2478/joeb-2019-0017. Full text in Research Archive Show summary

  An electrical measurement is non-linear when it is affected by the applied stimulus, i.e. when the measured phenomenon changes with amplitude. If pinched hysteresis loops can be observed in the voltage current representation, the underlying tissue can be classified as a memristor. Several biological memristors have been published, like human skin and apples. However, changes in the polarization impedance of electrodes may also cause pinched hysteresis loops. The question whether the reported biological memristors are real or whether the results just reflect changes in the polarization impedance arises. If the impedance of the measured object is close to or smaller than the polarization impedance of the used electrodes, the latter may dominate the measurement. In this study, we investigated the non-linear electrical properties of silver/silver chloride electrodes in a sodium chloride solution that has a similar concentration as human sweat and compared these to results from human skin. First of all, we found that silver/silver chloride electrodes in sodium chloride solution can be classified as memristors. However, the currents obtained from the sodium chloride solution are much higher than the currents recorded from human skin and there is a qualitative difference in the pinched hysteresis loops in both cases. We can conclude that the non-linear electrical measurements with silver/silver chloride on human skin are actually dominated by the skin and we can confirm that the human skin memristor really exists.

• Fasciani, Stefano & Rahman, Habibur (2018). Tangible Virtual Patch Cords. In Park, Tae Hong & Ahn, Doo-Jin (Ed.), Proceedings of the 2018 International Computer Music Conference. The International Computer Music Association. ISSN 9780984527472. p. 316–321. Full text in Research Archive Show summary

  This paper presents a system to tangibly manipulate the virtual patching cords in graphical programming environments, such as Max and Pure Data. The system includes a physical interface, a communication protocol, and a software library, providing physical extension of the graphical programming paradigm. The interface includes a patch bay with connectors representing signal inlet and outlets from the programming environment. When inlets and outlets are connected with patching cords, equivalent virtual connections are created at runtime. The system supports one-to-many and many-to-one connections with different signal combination schemes. The design of the hardware and software components of the current prototype is detailed in the paper, as well as possible use of the system for programming and live performances.

• Liwal, Khushal Khan; Copiaco, Czarina; Vohra, Manohar; Rahman, Habibur; Abdulaziz, Nidhal & Abdulmalek, Mohamedfareq (2017). Optimizing Communications and Automation in Micro Farms. International journal of latest research in engineering and technology. ISSN 2454-5031. 3(9), p. 97–101. Full text in Research Archive
• Rahman, Habibur; AbdulAziz, Nidhal & Abdulmalek, Mohamedfareq (2017). Design of a cluster-tree topology networking protocol over cost effective non-standard RF module. International journal of latest research in engineering and technology. ISSN 2454-5031. 3(9), p. 89–96. Full text in Research Archive
• Abdulmalek, Mohamedfareq; AbdulAziz, Nidhal; Rahman, Habibur; Rahim, A; Fie, M. & Soh, A [Show all 7 contributors for this article] (2016). Design of a 5.2 GHz circularly polarized textile patch antenna for on/off body radio propagation channel evaluation. International Conference on Electronic Devices, Systems, and Applications. ISSN 2159-2055. doi: 10.1109/ICEDSA.2016.7818481. Full text in Research Archive
• Rahman, Habibur; AbdulAziz, Nidhal; Abdulmalek, Mohamedfareq; Soh, Ping Jack; Rahim, A. & Giman, Fatin Nabilah [Show all 7 contributors for this article] (2016). Review of a dual band textile antenna. International Conference on Electronic Devices, Systems, and Applications. ISSN 2159-2055. doi: 10.1109/ICEDSA.2016.7818496. Full text in Research Archive
• Rahman, Habibur & Muthukumaraswamy, Senthil Arumugam (2015). Preemptive Multitasking on Atmel® AVR® Microcontroller. In Mastorakis, Nikos E. & Rudas, Imre J. (Ed.), Proceedings of the 9th International Conference on Computer Engineering and Applications (CEA'15). WSEAS. ISSN 9781618042767. p. 196–204. Full text in Research Archive

View all works in NVA

• Rahman, Habibur; Recha, Adrian Miguel Llop; Wisland, Dag Trygve Eckhoff & Kjelgård, Kristian Gjertsen (2024). Phase-Tunable CMOS Hybrid Coupler for Dual-Mode Reflection Analysis. Full text in Research Archive
• Rahman, Habibur (2020). Tunable Gaussian Pulse Generator for Ultra-WideBand RADAR Applications in 65nm CMOS. Universitetet i Oslo. Full text in Research Archive Show summary

  This thesis designs a Gaussian pulse generator by the method of up-conversion with for use as a front end transmitter unit of an UWB-IR. The baseband pulse is generated using the delay elements (CTBV technique) but having the carrier frequency sourced externally can offer the advantage such as higher tunability of the pulse shape and mitigate phase noise if the clock source is jitter-free. The architecture design is successful and the simulation results exhibit the expected rendering of the up-converted Gaussian pulse trajectory. The design is implemented in the 65nm CMOS process technology by TSMC. The thesis briefly describes the basic radar fundamentals that are influenced as part of the pulse tuning capability, such as the carrier frequency, bandwidth which affects the resolutions and penetration into lossy mediums of the target. The potential applications of the system are also described, such as in snow hydrology, biomedical applications, etc. The architecture is described with reasoning for taking a specific design approach, providing the necessary component dimensions that can help replicate the design by other interested users. The chip has arrived on at the facility on 7 June 2020, one week before the deadline for submission of this thesis dated 15 June 2020. Within this one week window period, the wire-bonding of the chip on the PCB, setting up of the types of equipment required for measurement has been conducted and attempt to get the successful results have been made, but no expected results have been obtained from the implemented chip. Due to the shortage of time, further investigation of the problems or re-analyzing the design for potential faults could not be made.

View all works in NVA